BFS1 Hydraulic Torque Generator

Products · Steering Units

BFS1 Hydraulic Torque Generator

Not a steering unit — a torque amplifier. BFS1 turns 1.6–2.4 N·m of wheel input into usable output torque, and still steers manually at 118 N·m if the pump stops.

THOTH / ZiHYD · Since 1971  ·  ← Selection guides using BFS

THOTH BFS1 hydraulic torque generator for steering systems

BFS1 is an open-centre component that converts hydraulic energy into mechanical torque at the steering column. An integrated control set and gerotor set work together so the output is the sum of the operator’s input torque and the torque the gerotor generates — light at the wheel, firm at the output.

Because output follows steering wheel speed rather than a fixed ratio, the operator keeps proportional feel through the whole travel. A relief valve protects the set; the reference configuration is a 6 MPa safety setting.

The failure case is designed in: if hydraulic supply is lost, the unit can still be steered manually at up to 118 N·m. Typical duty is wheel travel machines where row accuracy matters — high-speed rice transplanters are the reference application — and large manual valve systems.

Specifications · BFS1

TypeOpen-centre hydraulic torque generator (control set + gerotor set)
Displacement63 – 125 ml/r
Steering torque1.6 – 2.4 N·m
Max manual steering torque118 N·m
Safety valve setting6 MPa (reference configuration)
Output characteristicFollows steering wheel speed; output = input torque + gerotor torque
Emergency modeManual steering retained on loss of hydraulic supply
Typical dutyHigh-speed rice transplanters · wheel travel machines · large manual valve systems

Used in these application guides