BHF5 Combinatory Valve Block for Hydraulic Steering

Products · Steering Units

BHF5 Combinatory Valve Block

Four protective functions on one plate — relief, bidirectional overload, inlet check and return filtration — bolted straight onto the port face of a BHR steering unit.

THOTH / ZiHYD · Since 1971  ·  ← Selection guides using BHF

THOTH BHF5 combinatory valve block for hydraulic steering units

BHF5 is the safety layer of a BHR-series full hydraulic steering circuit. Rather than plumbing four separate cartridges into the line, the block mounts directly on the port face of the steering gear — no extra hoses, no added envelope, and one interface to seal.

What it protects against: system overpressure through the main relief (6.3–16 MPa); road shock fed back from the wheels through bidirectional overload valves (12.5–22 MPa); cavitation on the return stroke through suction check valves cracking at 0.05 MPa; and contamination through integrated return filtration.

Published settings are referenced at 30 L/min with 20 mm²/s oil at 50 ± 5 °C for the relief valve, and 4 L/min for shock valve testing — quote your own flow and viscosity when specifying, since crack pressure shifts with both.

Specifications · BHF5

TypeCombinatory valve block for full hydraulic steering units
Pairs withBHR-series full hydraulic steering gears
MountingPlate-mounted directly on the steering gear port face
Rated relief pressure6.3 – 16 MPa
Overload valve pressure12.5 – 22 MPa (bidirectional)
Suction valve cracking0.05 MPa
FunctionsInlet check · safety relief · bidirectional overload · return filtration
Reference test conditions30 L/min, 20 mm²/s, 50 ± 5 °C (relief) · 4 L/min (shock valve)

Used in these application guides