AHW01 Vehicle-Mounted Hydraulic Winch

Products · Winches and Rotators

AHW01 Vehicle-Mounted Hydraulic Winch

Recovery pull without a second power source — AHW01 runs off the vehicle’s own power steering circuit. 6,000 and 10,000 lbf first-layer pull at 10 MPa.

THOTH / ZiHYD · Since 1971  ·  ← Selection guides using AHW01

THOTH AHW01 vehicle-mounted hydraulic recovery winch

AHW01 is a sealed package — hydraulic motor, brake, drum and planetary gearbox in one assembly. The point of the hydraulic architecture is that it draws from the vehicle’s power steering system or any existing hydraulic source, so a recovery winch can be added without an electrical upgrade, a second pump or a duty-cycle limit.

That last part matters in the field. An electric recovery winch has to rest; a hydraulic one pulls as long as the engine runs — which is the difference between one attempt and a sustained recovery out of deep mud.

The drum brake is actuated automatically by the directional valve — no separate control, no operator step to forget under load. Two ratings cover the range: AHW01-B6000 and AHW01-B10000, named for first-layer pull in lbf.

Specifications · AHW01

TypeVehicle-mounted hydraulic winch (motor + brake + drum + planetary gearbox)
ModelsAHW01-B6000 · AHW01-B10000
First layer pull6,000 lbf · 10,000 lbf
Working pressure10 MPa
Speed range5 – 78 r/min
Rope diameter9 mm
BrakeIntegrated drum brake, actuated automatically via the directional valve
Power sourceVehicle power steering circuit or other existing hydraulic supply
Typical dutyVehicle recovery · moving large objects · construction and industrial site work

Used in these application guides