BH Orbit Hydraulic Motor

Products · Orbital Motors

BH Orbit Hydraulic Motor

Specified for what it is — an economical ductile cast iron orbit motor for lighter loads and intermittent duty. 49.3–383.1 cc/rev, up to 400 N·m and 8 kW.

THOTH / ZiHYD · Since 1971  ·  ← Selection guides using BH

THOTH BH orbit hydraulic motor with ductile cast iron shell

BH is built for interval operation under moderate load — and that constraint is the specification, not a caveat. Sizing a continuous-duty motor into an auxiliary drive that runs a few minutes an hour adds cost and weight for capability the machine never uses.

The construction is a ductile cast iron shell with axial oil distribution, which is what carries the efficiency and service life at this price point. The shaft seal is rated for high motor pressure, so units can be run in parallel or in series where one circuit has to drive two functions.

Typical duty is agricultural and forestry machinery, plastics equipment, machine tools and mining machinery — auxiliary and intermittent drives rather than traction.

Specifications · BH

TypeOrbit motor, ductile cast iron shell, axial oil distribution
Displacement49.3 – 383.1 cc/rev
Maximum torque90 – 400 N·m
Max continuous speed155 – 810 rpm
Max continuous flow40 – 60 L/min
Maximum output power4.5 – 8 kW
Circuit optionsParallel or series connection (high-pressure shaft seal)
Intended dutyLighter load, interval / intermittent operation
Typical applicationsAgriculture · forestry · plastics · machine tools · mining machinery

Used in these application guides