BS Shaft Distribution Orbit Hydraulic Motor

Products · Orbital Motors

BS Shaft Distribution Orbit Motor

When the envelope decides the motor. Spool-valve distribution and a column-type rotor pair in a ductile iron housing — 50–400 ml/r, 65–380 N·m, low starting pressure.

THOTH / ZiHYD · Since 1971  ·  ← Selection guides using BS

THOTH BS shaft distribution orbit hydraulic motor

BS exists for the installation that has no room left. Shaft (spool valve) distribution with a column-type rotor pair keeps the housing short, and the spool design takes weight out — which is usually the deciding factor when a drive has to go into an already-crowded frame.

The geroler gear set gives low friction and, more usefully, low starting pressure — the motor breaks away cleanly instead of needing a pressure spike to start turning. That matters on mould adjustment drives and platform gearing where the first movement has to be smooth and predictable.

Two inner check valves let the motor run with a closed drain line — one less port to plumb and one less leak path. The high-pressure shaft seal allows parallel or series connection. Typical duty is injection moulding mould adjustment, sweepers, sawmills and working platforms.

Specifications · BS

TypeShaft (spool valve) distribution orbit motor, column-type rotor pair, ductile iron housing
Displacement50 – 400 ml/r
Torque65 – 380 N·m
Maximum flow40 – 60 L/min
Speed range10 – 810 r/min
Gear setGeroler — low friction, low starting pressure
Drain lineDual inner check valves — closed drain line capability
Circuit optionsParallel or series connection (high-pressure shaft seal)
Typical applicationsInjection moulding mould adjustment · sweepers · sawmills · working platforms

Used in these application guides