Products · Orbital Motors
BMRW Ductile Iron Orbit Motor
The BMR gear set in a ductile iron casting shell — 25–400 ml/r, 34–380 N·m, and no drain connection to plumb.
BMRW is the ductile iron casting version of the BMR family, built for small-load and gap (intermittent) work. The shell carries sufficient strength for the duty without paying the weight and cost of a heavy-duty frame the application never asks for.
Two construction details do most of the work. Deep groove ball bearings on the output shaft take both axial and radial force, so a belt pull or a side-loaded brush head does not go straight into the gear set. Axial oil distribution keeps the package compact and the weight down.
The cycloidal group runs on rollers — low friction, high mechanical efficiency — and dual internal check valves remove the need for a drain connection. Typical duty is injection moulding mould adjustment, street sweepers, sawmills and working platforms across agriculture, forestry, plastics, machine tools and mining.
Specifications · BMRW
| Type | Orbit motor, ductile iron casting shell, axial oil distribution |
| Displacement | 25 – 400 ml/r |
| Torque | 34 – 380 N·m |
| Maximum flow | 40 – 60 L/min |
| Speed range | 10 – 1,550 r/min |
| Bearings | Deep groove ball bearings — axial and radial load capable |
| Gear set | Cycloidal group with rollers — low friction, high mechanical efficiency |
| Drain line | Dual internal check valves — no drain connection required |
| Intended duty | Small load, intermittent (gap) operation |
| Family | BMR series — see also BMR |
| Typical applications | Injection moulding mould adjustment · street sweepers · sawmills · working platforms |
Used in these application guides